In order to maintain and care for the automatic plastic cup making machine and extend its service life, a series of measures can be taken as follows:
1. Daily inspection and maintenance
(1)Visual inspection:
Regularly visually inspect the machine parts to check for signs of wear, loose bolts or abnormal vibrations. These inspections help to detect and solve problems in a timely manner and prevent small problems from gradually expanding.
(2)Cleaning work:
Remove debris and residues from the molding area, conveyor belt and feeding system. These residues may affect the normal operation of the machine and even damage machine parts. Use appropriate cleaning agents for cleaning to ensure that the biodegradable materials used are not damaged.
Regularly check and clean the mold, especially the deposits under the injection plate and the broken plastic in the blank holder, to keep the mold clean and in good condition.
(3)Lubrication maintenance:
Keep the moving parts well lubricated to reduce friction and wear. Apply grease to linear bearings, ejector rods, pressure-assisting plug rods and other parts regularly according to the recommendations in the machine manual.
Inspect and replace worn lubrication points, such as grease nozzles or similar lubrication points, to ensure the normal operation of the lubrication system.
2. Regular inspection and maintenance
(1)Electrical component inspection:
Check whether the electrical components have signs of damage or corrosion to ensure the safe and stable operation of the electrical system.
Check whether the wiring connection is firm to prevent electrical failure caused by loose wiring.
(2)Cooling system inspection:
Regularly check the water pressure and water volume of the cooling system to ensure good cooling effect. When using pure heavy water for cooling, the cooling system should be cleaned regularly to prevent stains from accumulating.
(3)Wear parts inspection:
Regularly check the wear of components such as molds, ejector rods, and pressure-assisting plug rods. If the wear is serious, it should be replaced in time to avoid affecting product quality and production efficiency.
3. Software and upgrades
If the automatic plastic cup making machine runs with software, the software should be updated regularly to keep it up to date. New versions usually contain performance improvements and bug fixes, which help improve production efficiency and product quality.
4. Professional maintenance
Learn to identify and solve common problems such as irregular molding, inconsistent output, or material blockage. If you encounter problems that are difficult to solve, you should contact the manufacturer's technical support or certified technicians for repairs in time.
5. Operation precautions
During operation, strictly abide by the operating procedures and safety specifications to ensure safety during production.
Avoid using inferior recycled materials containing metal impurities or sand to avoid damaging the machine.
In abnormal situations such as sudden power outages, the power supply should be cut off and certain operations should be stopped. Subsequent work can only be carried out after normal operation is restored.
By implementing the above measures, the fully automatic plastic cup making machine can be effectively maintained and maintained, its service life can be extended, and production efficiency and product quality can be improved.
